Make your old dresser the most Design furniture

How much can you get bored of the old chest of drawers you got from your maiden name or…
purchased at the beginning of your marriage? If it’s been years and years since then, a change will do you to see with another eye the chest of drawers. See how to renew it easily and economically!
What you will need
A good print (in good resolution) of the photo you have selected, the dimensions of the front panel of the dresser
A large piece of white paper
Glue decoupage (you can find it in stationery stores and construction)
A brush to apply the glue
A cutter
Start spreading the picture on the floor. Cut the white paper into as many equal parts as there are the drawers of the dresser. Make sure the pieces match exactly in each drawer.
Then carefully cut the picture of you putting over the white paper and cutting it with the light of the paper.
Then, turn upside down the pieces of the photo and apply to each of these glue decoupage. Glue them carefully one-by-one over the chest of drawers. If your drawers are bolted knobs, unscrew it before doing the whole process and after you paste the picture, screw it again. If you don’t ξεβιδώνονται the knobs you will need to cut the photo in half and glue each part separately and around the doorknob. Be sure to fit in well and don’t leave air bubbles under the photo.
End, cut with a chisel what is left over. What you want is the photo to continue. Over spend 1 or 2 coats of decoupage (a glue that is transparent, which means it will not affect your photo) and once dry, place each drawer into place. Isn’t it great?


Source

Exit mobile version